Part #60xxx / Roll Bar
Race Bolt-In
Roll Bar
Solo, autocross, time trial, HPDE.
Quick spec
- Install
- Bolt-In
- Category
- Roll Bar
- Part series
- 60xxx
- Fits
- 263 vehicles
SCCA
NASA
SFI Certified Manufacturer
Overview
Made in the U.S.A. Built to survive.
The Race bar is our most rigid bolt-in structure. Ships with harness bar and crossbar welded in place — order the removable option for easier rear-seat access. Stock interior remains in place. Most applications are bolt-in but some do require welding. Fabricated to order in San Diego from seamless DOM mild steel tubing to SCCA-approved geometry.
Every Auto Power structure is fabricated to order in our San Diego shop. Lead time is typically 3–4 weeks. Custom variants are quoted individually.
Features
What you're getting
01
4-point bolt-in with diagonal cross brace and harness mount tube
02
Harness bar and crossbar welded in place (removable option available)
03
Full diagonal + rear stays for maximum chassis stiffness
04
Stock interior remains in place
05
SCCA-approved design
06
Suits SCCA Club Racing and NASA HPDE 3/4
In the kit
▸
4-point roll bar
▸
Diagonal cross brace
▸
Harness mount tube
▸
1.750 x .120 DOM steel (or 1.500 x .120 DOM)
▸
Most applications bolt in, some require welding
▸
Hardware with back-up plates
Specs
By the numbers
- Points
- 4
- Tubing
- 1.75" x .120" wall (1.5" x .120" available)
- Material
- DOM mild steel, seamless
- Finish
- Raw or powder coat
- Compliance
- SCCANASASFI Certified Manufacturer
- Lead time
- 3–4 weeks
Important
Most applications are bolt-in but some do require welding.
Stock interior remains in place.
Next Step
Ready to spec race bolt-in roll bar for your car?
Fabricated
In-house
Bent, notched, and welded in our San Diego shop. Every part traceable to the fabricator who built it.
Ships
Flat rate
Domestic US ground shipping at a single flat rate — with a discount for California destinations.
Support
Talk to a fabricator
Custom mounting, special configurations, or non-listed vehicles — call the shop directly.
